Personal Sampler for Viable Airborne Microorganisms: Main Development Stages

Abstract

AbstractA new personal bioaerosol sampler has been developed and verified as an efficient tool for monitoring of viable/non‐viable airborne microorganisms, including bacteria, fungi, and viruses. The operational principle of the device is based on continuous passage of an air sample through porous media submerged into a liquid layer. During motion along narrow and tortuous ways inside the porous media, the air stream is split into a large number of ultra small bubbles with the particulates are being scavenged by these bubbles and, thus, effectively trapped. The device was initially verified for monitoring of viable airborne bacteria and fungi, firstly, under controlled laboratory conditions and later in a field. It was demonstrated that bacterial recovery rates for these two groups of microorganisms were very high and the device was found to be fully feasible for such monitoring. The next step of the device investigation was performed in the laboratory on monitoring viable airborne viruses with a range of sensitivities to physical and biological stresses. As the result, the new personal sampler demonstrated a very high recovery rate even for viruses which are rather sensitive to environmental stress (Avian Influenza, SARS, Mumps, etc.). Some following field studies, undertook in a hospital and animal houses, also demonstrated an excellent performance of the new device for selective and reliable monitoring of viable airborne viruses even in environments highly contaminated by other microorganisms. This paper reviews the main development staged of the new personal bioaerosol sampler.