Persistency of bacterial indicators in biosolids stabilization with coal fly ash and lime.

Abstract

Alkaline coal fly ash and lime were tested for their effectiveness in pathogen removal from biosolids at different time intervals and temperatures. Coal fly ash at 10 and 35% w/w was mixed with dewatered biosolids and then the ash-biosolids mixture was mixed separately with 0, 1.1, 2.2, 4.4, 8.5, 11, and 18% calcium oxide (w/w on a dry weight basis) with and without heating to 55 degrees C. Total bacteria, salmonella, and total coliforms were monitored at various time intervals. Both ash-biosolids mixtures with or without lime amendment had a significantly lower total bacterial population than the biosolids control, but the residual indigenous bacterial flora in the ash and lime stabilized biosolids still maintained a population of greater than 10(4) g(-1) dry biosolids. Alkaline-stabilized biosolids with a lime amendment rate greater than 8.5% could maintain pH greater than or equal to 12 for more than 2 hours, which effectively removed total coliforms and salmonella in the mixture. Heat treatment to 55 degrees C and a storage time of 14 days provided an added advantage resulting in a further reduction in pathogens for all treatments. It is recommended that 10% ash-biosolids mixture should be amended with a minimum of 8.5% lime on a dry weight basis for at least 2 hours to achieve acceptable levels of salmonella and total coliforms to ensure no pathogenic risk following land application.