Abstract
As coal mass is often at unloading status during mining process, it is of great significance to push on the research on permeability evolution of unloaded coal samples at different loading rates. A series of triaxial unloading experiments were conducted for initially intact coal samples using an improved rock mechanics testing system, and the permeability was continuously measured by the constant pressure differential method for methane. Permeability evolution law of unloaded coal samples and the influence mechanism of loading rates on that were studied. The results of triaxial unloading experiments indicate that the permeability of coal samples increases throughout the whole testing process without a descent stage, which is different from the permeability evolution law in conventional triaxial compression tests. The maximum permeability of unloaded coal sample, which is 4 to 18 times to its initial permeability, often appears before reaching the peak stress and increases with the decrease of axial loading rate. Stress state corresponding to the surge point of permeability of the unloaded coal samples is also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.