Abstract
The linear polarized (LP) mode multiplexer based on the inverse designed multi-plane light conversion (MPLC) has the advantages of low insertion loss and low mode crosstalk. However, the multiplexer also requires the fabrication and alignment accuracy in experiments, which have not been systematically analyzed. Here, we perform the error tolerance analysis of the MPLC and summarize the design rules for the LP mode multiplexer/demultiplexer. The error tolerances in the fabrication process and experimental demonstration are greatly released with proper parameters of the input/output optical beam waist, the pitch of optical beam array, and the propagation distances between the phase plane. To proof this design rule, we experimentally demonstrate the LP mode multiplexer generating LP01, LP11a, LP11b, LP21 modes and coupling to the few mode fiber, with the insertion loss lower than -5 dB. The LP modes are demultiplexed by MPLC, with the crosstalk of different mode groups lower than -10 dB. LP modes carrying 10 Gbit/s on-off keying signals transmit in a 5 km few mode fiber. The measured bit error rates (BER) curves of the LP01, LP11a, LP21 modes have the power penalties lower than 12 dB.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
