Performance optimisation for an irreversible variable-temperature heat reservoir air refrigerator

Abstract

SYNOPSIS The performance analysis and optimisation of an irreversible air refrigerator with variable-temperature heat reservoirs is carried out by taking the cooling load density, i.e., the ratio of cooling load to the maximum specific volume in the cycle, as the optimisation objective using finite-time thermodynamics (FTT) or entropy generation minimisation (EGM) in this paper. The analytical formulae for the relationships between cooling load density and pressure ratio, as well as between coefficient of performance (COP) and pressure ratio are derived with the heat resistance losses in the hot- and cold-side heat exchangers, and the irreversible compression and expansion losses in the compressor and expander. The influences of the effectiveness of the heat exchangers, the inlet temperature ratio of the reservoirs, and the efficiencies of the compressor and expander on the cooling load density versus and pressure ratio are provided by numerical examples. The cooling load density optimisation is performed by finding the optimum pressure ratio of the compressor, the optimum distribution of heat conductance of the hot- and cold-side heat exchangers for a fixed total heat exchanger inventory, and the optimum heat capacity rate matching between the working fluid and the heat reservoirs. The influences of some design parameters, including the effectiveness of the heat exchangers between the working fluid and heat reservoirs, the efficiencies of compressor and expander, the inlet temperature ratio of heat reservoirs, the heat conductance distribution and the heat capacity rate matching between the working fluid and the heat reservoirs on the maximum cooling load density are provided by numerical examples. Optimisation of refrigeration plant design leads to a reduction in size of the compressor, expander, and the hot- and cold-side heat exchangers.