Performance of Wrought Superalloys in Extreme Environments

Abstract

As power generation systems move towards higher efficiency operation above 700 ℃, wrought superalloys are the leading structural alloy candidates, including precipitationPrecipitation strengthened (PS) alloys 740 and 282 for the highest temperatures. To evaluate the performance of these alloys for these applicationsApplications , a range of 500–5000 h evaluations have been conducted in environments including steamSteam , supercritical CO2 (sCO2) and simulated combustion exhaust with H2O and/or SO2 at 700–800 ℃ and compared to baseline exposures in laboratory air and 1 bar CO2. These alloys primarily rely on the formation of an external Cr-rich oxide layer or scale for environmental protection and the reaction rates in all of these conditions are similar and relatively low. However, compared to a conventional solid solution strengthened alloy, like 625, the mass gains are higher for PS alloys due to the internal oxidationOxidation of the γ′ forming additions, Al and TiTi/Al ratio . Post-exposure characterizationCharacterization has quantified the reaction products and the depth of internal oxidationOxidation is not a concern and does not appear to increase above the baseline behavior in laboratory air. Likewise, there is no indication of internal carburizationCarburization in the sCO2 environment at 750 ℃/300 bar. The addition of 0.1% SO2 in CO2-10% H2O at 800 ℃ actually suppressed the internal oxidationOxidation at 1 bar but SO2 may be a concern when the total pressure is higher.