Performance of U-tube solar water heater with vertical and inclined panels

Abstract

A conventional natural convection flat plate solar collector needs to be placed at an incline to the horizontal and exposed to the sun in order for the solar hot water heater system to work. This arrangement is satisfactory where there is ample roof top space to locate the collector and storage tank. In a high-rise apartment, space is at a premium and also the hot-water recticulation requires long lengths of piping to distribute the hot water supply to the individual apartment. Most every modern high-rise apartment has a balcony facing outward from the wall structure. Balcony-type solar water heaters (SWHs) are catching up fast in China. Their performance would depend on collector and storage tank designs and sizes, weather conditions (solar radiation intensity and ambient temperature) and direction in which the balconies are facing. This article compares the outdoor performance of two SWH systems incorporating the evacuated glass U-tube solar collectors operating under natural convection. The panels were tested in both the vertical and inclined positions using the same tank but at different times of the year. It was found that the inclined panel system performed better than the system with the vertical panel system.