Performance of the EL-3+ maskmaker

Abstract

IBM’s new e-beam maskmaker, designated EL-3+, is installed and operating in the IBM Advanced Mask Facility in Burlington, Vermont. This tool represents a significant extension in the state of the art in the manufacture of masks, particularly in the areas of minimum feature size and overlay. The tool routinely operates with 0.35 μm ground rules at 70 nm (3σ) registration to grid. The tool has demonstrated the ability to work at 0.25 μm ground rules as well. The primary mission of the tool is the production of 1X x-ray masks. Some of the tool parameters include a 50 keV electron beam operating at a current density of 20 A/cm2. The system uses a shaped spot with a maximum size of 2×2 μm2. Exposures are made over areas with dimensions of up to 80 by 80 mm with a 2.1 mm field size. Deflection within a field is done through a combination of magnetic and electric deflection in a variable axis immersion lens (VAIL) configuration. During exposure the pattern data is stored on-line in a 1 G-byte buffer. The pattern buffers are loaded directly from a host IBM 4381. The system automatically corrects for any field distortions to a level of 6.25 nm using a calibrated reference grid.