Abstract
The performance of the ANAMMOX process was investigated in two identical laboratory-scale multi- and single-fed upflow anaerobic sludge blanket (UASB) reactors (denoted R1 and R0) at different hydraulic residence times (HRTs) varying from 2.06 to 1.52 h and NH4(+)-N inf concentrations ranging from 70 to 266 mg L(-1). The substrate removal efficiencies of both reactors decreased as HRT decreased and NH4(+)-N inf increased. The kinetics of these reactions were analyzed, and the Stover-Kincannon model was appropriate to describe the process kinetics of the reactors. In addition, an empirical model incorporating the influent substrate concentration and HRT adequately described R1. Shock experiments were conducted in which the reactors were subjected to transient shock loads. The results showed that the operation of R1 was more stable than that of R0, especially in response to the substrate shocks. Subsequently, the properties of the ANAMMOX granules and the effects of the feeding protocol on those properties were investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
