Abstract

The flow over many blades and airfoils at moderate angles of attack and Reynolds numbers ranging from 104 to 105 undergoes separation due to the adverse pressure gradient generated by surface curvature. In many cases, the separated shear layer then transitions to turbulence and reattaches, closing off a recirculation region—the laminar separation bubble. An equivalent problem is formulated by imposing suitable boundary conditions for flow over a flat plate to avoid numerical and mesh generation issues. Recent work demonstrated that accurate large eddy simulation (LES) of such a flow is possible using only O(1%) of the direct numerical simulation (DNS) resolution but the performance of different subgrid-scale models could not be properly assessed because of the effects of unquantified numerical dissipation. LES of a laminar separation bubble flow over a flat plate is performed using a pseudo-spectral Navier-Stokes solver at resolutions corresponding to 3% and 1% of the chosen DNS benchmark by Spalart and Strelets (2000). The negligible numerical dissipation of the pseudo-spectral code allows an unambiguous assessment of the performance of subgrid-scale models. Three explicit subgrid-scale models—dynamic Smagorinsky, σ, and truncated Navier-Stokes (TNS)—are compared to a no-model simulation (under-resolved DNS) and evaluated against benchmark DNS data focusing on two quantities of critical importance to airfoil and blade designers: time-averaged pressure (Cp) and skin friction (Cf) predictions used in lift and drag calculations. Results obtained with explicit subgrid-scale models confirm that accurate LES of laminar separation bubble flows is attainable with as low as 1% of DNS resolution, and the poor performance of the no-model simulation underscores the necessity of subgrid-scale modeling in coarse LES with low numerical dissipation.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call