Performance of organic–inorganic hybrid anion-exchange membranes for alkaline direct methanol fuel cells

Abstract

A series of organic–inorganic membranes were prepared through sol–gel reaction of quaternized poly(vinyl alcohol) (QAPVA) with different contents of tetraethoxysilanes (TEOS) for alkaline direct methanol fuel cells. These hybrid membranes are characterized by FTIR, X-ray diffraction (XRD), scanning electron microscopy/energy-dispersive X-ray analysis (SEM/EDXA) and thermo gravimetric analysis (TGA). The ion exchange content (IEC), water content, methanol permeability and conductivity of the hybrid membranes were measured to evaluate their applicability in fuel cells. It was found that the addition of silica enhanced the thermal stability and reduced the methanol permeability of the hybrid membranes. The hybrid membrane M-5, for which the silica content was 5 wt%, showed the lowest methanol permeability and the highest ion conductivity among the three hybrid membranes. The ratio of conductivity to methanol permeability of the membrane M-5 indicated that it had a high potential for alkaline direct methanol fuel cell applications.