Abstract

Nanocomposite (NC) films based on biopolymer gelatin incorporated with varying amounts of K-doped zirconate (K2ZrO3) nanoparticles (NPs) have been fabricated by solution intercalation technique. NPs obtained by combustion method and their TEM result revealed the average size of NPs is 18 nm ± 2. The effects of NPs content on structural and morphological behaviors of gelatin nanocomposite (NCs) have been established by XRD, FTIR and SEM methods. AC conductivity (σ) was performed using LCR meter. The σ increases with an increase in frequency and dosage of NPs where the maximum σ obtained is 5.73 × 10–5 S/cm for gelatin/4 wt% K2ZrO3 at 25 °C. Cyclic voltammetry data displayed that gelatin–K2ZrO3 NCs have electrochemical stability in the range – 0.5 to + 1 V. Charge–discharge data exhibited a higher specific capacitance of 26.5 F/g with higher discharge time for NC doped with 4 wt% K2ZrO3 as compared to pure gelatin. The optical behaviors of NCs were deduced by UV–visible (UV) spectroscopy, where the data showed a higher absorption intensity with increasing NPs, while band gap energy was reduced from 4.18 eV for pure gelatin to 2.91 eV for gelatin/4 wt% K2ZrO3. Swelling and contact angle data showed gelatin NC films tend to be less wettability as compared to pure gelatin.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.