Performance of hybrid reinforcements in PVC composites. II: Use of surface‐modified mica and different cellulosic materials as reinforcements

Abstract

AbstractThe effect of the composition of various wood fibers and surface‐treated mica as well as different surface treatments of cellulosic materials on the mechanical properties of PVC composites has been evaluated. Cellulosics were surface modified by prior coating with maleic andydride (MA), mixtures of MA and Na‐silicate and isocyanate. The filler concentration was fixed at 25 wt%. Both tensile strength and modulus of composities filled solely with mica are superior to those of non‐treated wood fiber‐filled composities. while the reverse is true for impact strength (except for bagasse‐filled composities), ultimate elongation, and tensile toughness. Moreover, the mechanical properties of composities, with the exception of modulus, filled only with mica and/or non‐treated wood fibers are inferior to those of unfilled PVC. Compared to non‐treated fiber‐filled composites, properties improved when surface‐modified wood fibers were used alone, or along with mica. Isocyanate‐coated wood fibers ranked best with regard to the mechanical properties of the composities. Properties also changed with the change of wood species and compositions of mica and wood fibers. Experimental results indicate good compatibility between surface‐treated wood fibers/mica and PVC composities.