Abstract

Drilling and completion of horizontal wells have been proven to be a productive and profitable project, in comparison with the performance of the conventional vertical wells. However, in Nigeria there are very few application of horizontal wells as open-hole, this is largely due to the unconsolidated nature of Niger-Delta sands. This study examined the completion of open-hole horizontal wells with a case study of a field which is located within the Niger-Delta region in Nigeria. Two (2) wells which have been successfully drilled and completed were sampled. To achieve this, the performance of the completion option was examined using an analytical approach. This implored the Joshi’s model and Vogel’s equation to construct the Inflow Performance Relationship (IPR) plot. The vertical lift performance (VLP) was considered by employing Gilbert’s method. From the combined plots, the optimum operating condition of the wells indicated that well A has a productivity index of 1.039 Stb/day/psi with a maximum flow rate of 3250 Stb/day, while well B has a productivity index of 1.156 Stb/day/psi and maximum rate of 3370 Stb/day. The results show that horizontal well projects executed in fields within the Niger-Delta region can be expected to produce at good rates as obtained in other regions of the world. With the production capacity shown by these wells, improved conventional ultimate recovery is assured. Keywords: Horizontal Well, Inflow Performance Relationship, Open-hole, Productivity index, and Vertical Lift Performance. DOI: 10.7176/JEES/11-10-07 Publication date: October 31 st 2021

Highlights

  • Horizontal wells and multilateral wells are progressively being used for the production of oil and gas fields around the world

  • The results show that horizontal well projects executed in fields within the

  • With the production capacity shown by these wells, improved conventional ultimate recovery is assured

Read more

Summary

Introduction

Horizontal wells and multilateral wells are progressively being used for the production of oil and gas fields around the world. Joshi, (1986) stated that due to longer well length, in a given time period under similar operating conditions, a horizontal well would drain a larger reservoir area than a vertical well. This is practically possible because of the introduction of secondary permeability into the formation as a result of drilling into the formation. This research has been prompted by a thought of an improved completion option for wells drilled in Niger-Delta, considering the unconsolidated nature of Niger-Delta sands It is aimed at examine the performance of horizontal open-hole completions in the Niger-Delta, wherein the productivity index, the IPR, VLP and the optimum operating conditions were determined

Materials and Methodology
Procedure for Models Application
Models Application and Analysis
Results and Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call