Abstract

Research activities involving heat transfer at supercritical pressures have attracted attention in recent years because of possibility of increase in thermal output of heat transfer and industrial equipment. Because of high pressure and temperature conditions associated with heat transfer at supercritical pressures, only few experimental heat transfer studies are being carried out at supercritical conditions. The use of numerical tools for heat transfer and other related studies at supercritical pressures is increasing because of the high-pressure-temperature limitation of experimental studies at supercritical conditions. Heat transfer correlations implemented in these numerical tools are used to obtain numerical heat transfer data to complement experimental heat transfer data provided through experimental studies. In order to further broaden the understanding of fluid flow and heat transfer, this review examines the performance of heat transfer correlations adopted at supercritical pressures. It is found from the review that most of the correlations could predict heat transfer quite well in the low enthalpy region and few of the correlations could predict heat transfer in the high enthalpy region near critical and pseudo-critical conditions (heat transfer deteriorated conditions). However, no single heat transfer correlation is able to accurately predict all the experimental results presented in this work.

Highlights

  • Because of high pressure and temperature conditions associated with heat transfer at supercritical pressures, only few experimental heat transfer studies are being carried out at supercritical conditions

  • Heat transfer correlations implemented in these numerical tools are used to obtain numerical heat transfer data to complement experimental heat transfer data provided through experimental studies

  • In order to further broaden the understanding of fluid flow and heat transfer, this review examines the performance of heat transfer correlations adopted at supercritical pressures

Read more

Summary

Shitsi et al DOI

Deviations from normal heat transfer have been found to occur when the wall temperature is greater than the pseudo-critical temperature and the bulk temperature is less than the pseudo-critical temperature (Tw > Tpc > Tb), and the heat flux is above a certain value, depending on the flow rate and the pressure [6] It is known from the existing literature that buoyancy effect and bulk flow acceleration effect are mechanisms responsible for HTD as a result of the extent of variation of thermophysical properties at supercritical pressures [8] [9] [10]. 2) Buoyancy and bulk flow acceleration are two main mechanisms causing heat transfer deterioration at supercritical pressures as a result of significant variation of thermo-physical properties of fluids. It has been established that CFD modeling could help understand heat transfer phenomenon in supercritical pressure fluid

Performance of SCW Heat Transfer Correlations
Correlations for Determining the Onset of Heat Transfer Deterioration
SCW Pressure Drop Relations
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call