Performance of Granitic, Shale, and Limestone Forest Road Aggregates Subjected to Repeated Loading

Abstract

AbstractThis study compared the performance of three aggregate layers, commonly used in the construction of unbound forest roads in Ireland, when they were subjected to repeated loading in a new large-scale test rig. These layers comprised: (1) a layer of uncrushed, granitic, sandy gravel-a good quality road aggregate, (2) a layer of shale-a poor quality aggregate, and (3) a layer of crushed limestone–an excellent quality aggregate with a wet mix macadam (WMM) grading–on top of a poor quality shale subbase layer. The repeated load testing rig was designed and constructed to test different surface or completion layering thicknesses of the aggregates over a common formation or subgrade material of silty sandy soil. This testing was achieved by surface loading the aggregates through a 200-mm-diameter rubber pad-attached to a hydraulic actuator on the test rig-for up to 150,000 load applications. The subgrade pressures and surface deflections were measured at applied stresses of 500, 750, and 1,000 kPa. The g...