Performance of Chitosan/Carbon Nanotube-Coated Ultrafiltration Membranes for Natural Organic Matter Removal from Drinking Water

Abstract

The objective of this study is to improve the filtration efficiency of commercially available polyethersulfone (PES) ultrafiltration (UF) membranes, with a specific focus on removing natural organic matter (NOM) and preventing membrane fouling. The modification of UF membranes was accomplished by utilizing chitosan/multi-walled carbon nanotubes (CS/MWCNT-OH) and employing both dip and spin coating techniques. The membrane surface morphologies were evaluated using the Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Energy-Dispersive X-ray Spectroscopy (EDX) techniques. Tests were carried out to assess the effectiveness of the membranes in a laboratory-scale system using two primary water sources from Istanbul, specifically the Melen River and Terkos Lake. Total organic carbon (TOC), UV254 absorbance, turbidity, and trihalomethane formation potential (THMFP) were all measured as part of a thorough analysis. The surface morphology investigations verified the effective deposition of MWCNT-OH nanoparticles onto the membrane surface. This was corroborated by the reduction in the water contact angle, showing an improvement in the hydrophilicity of the membrane. The modified membranes demonstrated much higher TOC removal rates compared to the original membranes. Specifically, the removal efficiencies for Melen River and Terkos Lake were 37.14% and 56.86%, respectively. Nevertheless, the alteration of the surface led to a decline in membrane flux as a result of the concurrent drop in pore size. To summarize, the results of this work highlights the considerable capability of surface modification using CS/MWCNT-OH to improve the performance and antifouling characteristics of commercial PES UF membranes.