Abstract
Out of the main challenge facing dye sensitized solar cells (DSSCs) is the leakage and vaporization of liquid electrolyte limiting the long term durability of these cells. Therefore, solidification of electrolyte in DSSCs is a crucial research direction. In this work, DSSC was assembled using electrolyte system composed of Chitosan as host polymer, ethylene carbonate as plasticizer, LiI: I2 as redox couple and TiO2 as filler; TiO2 modified with WO3 photoanode to provide inherent energy barrier and anthocyanin as sensitizer. The obtained solar cell conversion efficiency was about 1.8% with fill factor 53% using an irradiation of 100 mW/cm2 at 25 °C. The prepared DSSC is not only stable but also eco friendly due to use of natural polymer and dye. © 2018 American Institute of Chemical Engineers Environ Prog, 38: 630–634, 2019
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.