Abstract
CdTe radiation detectors have been fabricated in a new M–π–n structure that provides very effective blocking for the leakage current and, as a result, excellent spectral responses are achieved. An iodine-doped n-CdTe layer was grown on the Te-faces of the (1 1 1)-oriented high-resistivity (∼10 9 Ω cm) ρ-type CdTe wafers at the low substrate temperature of 150°C. An aluminum electrode was evaporated on the n-CdTe side, while a gold electrode was evaporated on the other side. Low leakage current around 60 pA/mm 2 was typically attained for a 0.5 mm thick detector at room-temperature (25°C) for an applied reverse bias of 250 V. Improved charge collection efficiency and spectral responses for different radioisotopes in the energy range of a few tens of keV to several hundreds of keV were obtained due to the application of very large electric fields on the detectors. The performance of the detectors thus fabricated is presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.