Abstract

Performance of two-chambered microbial fuel cells (MFCs) using anion exchange membrane (AEM) was evaluated under batch mode with Shewanella putrefaciens in Luria broth. Maximum voltage and power density using Nafion and Ralex AEM were 0.676 V and 0.729 V and 39.2 ± 7.39 mW/m2 and 57.8 ± 5.509 mW/m2 respectively. Cathodic half cell potential was monitored along with cathodic pH and the results revealed that low power density was achieved in case of Nafion as compared to Ralex AEM mainly due to pH imbalance associated voltage losses using small external resistance of the same. Metabolite loss in AEM was found at higher current density which limits the Coulombic efficiency and power generation. A three parameters optimization showed that surface area of cathode had significant effect on the power generation. Effect of anode surface area, dissolve oxygen (DO) in catholyte and electrode spacing on power production were evaluated using AEM membrane.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.