Abstract
Two particulate amphoteric larch tannin (CLT) products (CTD and CTB) were prepared by cross-linking reactions, and their acid dyes removal abilities were investigated. The effects of several parameters such as pH, contact time, and particle doses were tested, and the acid dyes removal behaviors of both types of particles were compared. The removal of azo acid dyes on CTD and CTB was pH-dependent, and the maximum removal of ≥90.7% was reached for Acid Black 10 B and 52.6% for Acid Red 14 in aqueous solution at pH 5.0. The effect of particle dosages on the removal of Acid Black 10 B and Acid Red 14 was important for two modified CLT particles. An excessive amount of modified CLT particles increased the chromaticity of water samples and caused the decline of dyes removal. Zeta (ζ) potential data revealed that the main mechanism of removal of the acid dyes on the CTD and CTB particles was charge neutralization.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.