Abstract
This research work deals with the performance of high-density polyethylene sheets arranged in splash used as a fill for a cooling tower. “A forced-draught counter flow cooling tower” of 400 mm × 400 mm cross-sectional area and 1.7m in height was built. The fill has been studied theoretically and experimentally. Air rates of 0.6, 1.2, and 1.8 kg/s.m2 were utilized with water flow rates within the range of 1 to 1.6 kg/s.m2. The overall volumetric heat transfer coefficient, volumetric mass transfer coefficient (Mt), and the tower characteristics (Mt/L) are shown to be functions of the air and water flow rates concurrently. Four available input parameters were inlet water temperature, airflow rate, water flow rate, and full height. A computer program was prepared to perform numerical analysis for reducing data sets obtained from the plant. In addition, analysis was carried out for evaluating the volumetric heat and mass transfer coefficients along with the performance coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.