Abstract
Hydrogen conversion of CO by a pure culture of Carboxydothermus hydrogenoformans was investigated and optimized in a lab-scale hollow fiber membrane bioreactor (HFMBR). The reactor was operated under strict anaerobic, extremely thermophilic (70 °C) conditions with a continuous supply of gas, for four months. Reactor performance was evaluated under various operational conditions, such as liquid velocity (vliq) (13, 65 and 130 m h−1), temperature (70, 65, and 60 °C), CO pressure (from 1 to 2.5 atm) and CO loading rate (from 1.3 to 16.5molLrxr−1d−1). Overall, results indicated a relatively constant H2 yield of 92 ± 4% (mol mol−1) regardless of the operational condition tested. Permeation across the colonized membrane was improved by three orders of magnitude as compared to the abiotic membrane, because of dissolved CO concentration was constantly maintained low in the liquid on the shell side of the membrane as continually depleted by the microorganisms. Once the biofilm was sufficiently developed, a maximum CO conversion activity of 0.44 mol CO g−1 volatile suspended solid (VSS) d−1 was achieved at a pCO of 2 atm or above and a vliq of 65 m h−1. However, this highest activity represented only 15% of the maximal activity potential of the strain under non-limiting conditions, attributed to the low concentration of dissolved CO (0.01–0.07 mM) present in the HFMBR liquid. Higher vliq (130 m h−1) produced shearing stress, which detached a significant portion of the biofilm from the membrane, and/or prevented less sessile growth (57% total biomass as biofilm, as opposed to 84–86% at lower vliq). One may deduce from this work that the volumetric CO conversion performance of such a membrane bioreactor would be at the most in the range of 5molCOLrxr−1d−1. Overall, the CO conversion performance in the HFMBR was biokinetically limited, when not limited by gas–liquid mass transfer. Additionally, over time, membrane fouling and aging decreased membrane permeability such that the CO transfer rate would be the most limiting factor in the long run.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.