Abstract

It is known that surface passivation plays a significant role in upgrading solar cell performance. In this study, silicon thin films deposited by LPCVD (low pressure chemical vapor deposition) are used to passivate the surface of solar-grade p-type crystalline silicon solar cells for the first time. Intrinsic amorphous silicon films and poly-silicon films were obtained on the front and rear surfaces of solar wafers at the deposition temperatures of 560°C and 620°C, respectively. Both kinds of silicon films proved to be effective in improving the open-circuit voltage owing to surface passivation for crystalline silicon solar cells. Optical spectral responses in the short and long wavelength ranges (e.g. the range 300–600nm and the range 850–1100nm, respectively) also showed an improvement in photogenerated current resulting from reduced surface recombination rates on the front and back surface.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.