Abstract
In this paper, a systematic design of a novel back reflector using chirped grating structures is investigated for thin-film amorphous silicon (a-Si) solar cells. At first, a cell with an optimum ITO antireflecting layer is simulated and a photocurrent of 17.67 mA cm−2 is obtained. Then a conventional grating from SiO2 is evaluated and the maximum photocurrent of 18.97 mA cm−2 is calculated. Then a thin-film solar cell based on the chirped back grating is designed and the photocurrent is increased to 19.30 mA cm−2. Also, their integrated optical absorption is compared for better understanding. To give a numerical comparison of the cells with a different number of chirped grating layers, a short circuit current for different numbers of grating layers is analyzed. It is shown that maximum current density is obtained for 5 layers grating with the chirped coefficient length of near 20 nm. It is believed that chirped back grating can be used to design higher performance thin film a-Si solar cells and the results are helpful for photovoltaic applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
