Performance improvement of a direct carbon solid oxide fuel cell via strontium-catalyzed carbon gasification

Abstract

As a new way of power generation, direct carbon solid oxide fuel cells (DC-SOFCs) exhibit great potential in solution of energy crisis and environmental pollution. According to the working principle, the cell operation is a kinetically controlled process, and the reverse Boudouard reaction is the rate-determining step of the whole system. In this study, a Sr-based catalyst is successfully introduced to accelerate carbon gasification and thus enhance cell performance of DC-SOFCs. The electrochemical performance of DC-SOFCs operated on coconut active charcoal with various Sr loading contents (3 wt%–10 wt%), are studied and compared with that of DC-SOFCs with traditional Fe-catalyzed carbon fuel. Experimental results demonstrate that the best output of 316 mW cm−2 is achieved from the single cell powered with 5 wt% Sr-loaded coconut active charcoal at 850 °C, higher than those of DC-SOFCs fueled by pure and 5 wt% Fe-loaded active charcoal. The superiority of the Sr-based catalyst is also demonstrated by the operation stability of the corresponding DC-SOFC, which displays a relatively long operation time of 22.68 h at 0.25 A cm−2 with the fuel utilization of 18.3%. The SEM/EDX results indicate that the Sr-based catalyst exhibits good stability without agglomeration during cell operation at high temperature. In addition, the carbon gasification mechanism catalyzed by Sr-based catalyst is also proposed on the basis of these properties. This study indicates that the designed Sr-loaded coconut active charcoal is expected to be an alternative carbon fuel for DC-SOFCs.