Performance evaluation of proton exchange membrane fuel cells adopting rectangular-baffle and tapered flow channels with an equivalent average depth

Abstract

ABSTRACT Optimizing the flow channel structures can improve the efficiency of proton exchange membrane fuel cells and promote the efficient utilization of clean energy. This study investigates the impacts of rectangular-baffle and tapered flow channels on electrical performance, temperature distribution and mass transfer of proton exchange membrane fuel cells, based on a 3D, multi-physical model. The equivalent average depth is adopted as the reference benchmark to mitigate the influence of channel depth. Results indicate that adopting variable-depth channels enhances convective mass transfer on the porous layer surface under higher voltage. The convective mass transfer of oxygen is dominant in the activation polarization region, while diffusion is dominant in the concentration polarization region. Variable-depth channels enhance heat and mass transfer in comparison to the straight channel. The tapered channel can improve the mass transfer flux in oxygen starvation region, and the drainage ability of the rectangular baffle channel is inferior to the tapered channel. The rectangular baffle channel demonstrates better convective heat transfer performance and temperature uniformity. A rectangular-baffle channel can increase net power by 4.31%, while a tapered channel can achieve a maximum increase of 9.27% when the pumping power is considered. Therefore, incorporating a tapered channel is an optimal strategy to boost cell efficiency.