Abstract
Modification by physical and chemical treatments was evaluated to increase the adsorption capability of natural pumice in the removal of Cu(II) from aqueous solution. The treatments were heating at temperatures of 300, 450 and 600 ℃ for physical and soaking in acid solutions (HCl, H2SO4 and HNO3) for chemical treatment. The adsorption was performed in the batch system at the optimum condition (5 of pH solution, < 63 µm of adsorbent diameter, 3 g/L of adsorbent dose, 5 mg/L of Cu(II) concentration and 30 min of contact time). The results showed the removal efficiency and Cu(II) uptake increased using modified pumice from 71.19 % and 1.19 mg/g to 84.45 % and 1.41 mg/g. The highest removal efficiency and Cu(II) uptake were obtained from 300℃ of heating temperature and HCl for the acid solution. The application of physical and chemical treatments in modification has the potential to increase the removal efficiency and heavy metal uptake of the natural pumice.
 HIGHLIGHTS
 
 Various methods have been evaluated for the modification of pumice to improve their sorption capacity
 Physical and chemical treatment to pumice may modify the surface areas, pore structures, and chemical functional group on the surface of the pumice
 
 GRAPHICAL ABSTRACT
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
