Abstract
In this paper, we analyze the performance of a simple receiver architecture for Impulse Radio (IR) Ultra Wide Band (UWB) systems. The receiver makes use of a Differential Binary Phase Shift Keying (DBPSK) modulation, and a Differential Rake (D-Rake) receiver that does not require channel estimation. The performance study is conducted by considering the recently standardized IEEE 802.15.4a channel model, as well as Narrow-Band Interference (NBI) co-located in the same transmission band of the UWB signal. The analysis will be performed with and without frequency and timing synchronization errors, in order to identify the design constraints of the synchronization unit to guarantee the proper operation of the receiver over realistic propagation environments. The results will show that i) NBI can significantly worsens the performance of the receiver, ii) the maximum tolerable frequency offset should be less than 10KHz for a UWB signal with center frequency equal to 4.5GHz, and iii) the maximum tolerable timing offset should be much less than 4.2ns for a pulse with width of 10ns (500MHz of transmission bandwidth at -10dB with respect to the spectrum peak) and a chip time with duration of 85.3ns.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.