Performance evaluation of IDW, Kriging and multiquadric interpolation methods in producing noise mapping: A case study at the city of Isparta, Turkey

Abstract

In order to produce an accurate noise map of a city or a region, it is necessary to make noise measurements at certain locations and these measurements must be modeled with the most suitable mathematical algorithm. A homogeneous and representative distribution of the noise measurement points is the first key factor in the production of sound noise maps. The second key element is the calculation of the noise values of gridding points based on noise measurement points according to the selected mathematical calculation method and the generation of maps according to these gridding points. In this study, a noise map of the Isparta city center and its periphery was produced using inverse distance weighted (IDW), Kriging and multiquadric interpolation methods with different parameters and four grid resolution. Then, the influence of parameter selection for each method was investigated in themself by taking into account grid resolution, namely 10∗10m, 50∗50m, 100∗100m and 200∗200m, and the performance of three method with 50∗50m grid resolution were compared with each other. In addition, the noise mapping of the city of Isparta were produced by Kriging method with respect to maximum, average and minimum noise data and they were evaluated by considering the national environmental noise thresholds.