Performance Evaluation of GFDM Channel Estimation Using DFT for Tactile Internet Application

Abstract

In this work, discrete Fourier transform (DFT)-based channel estimation is proposed in generalized frequency division multiplexing (GFDM) system. In the GFDM system, the subcarriers are non-orthogonal; therefore, the pilot symbols cannot be easily observed due to the interference from data symbols and noise. The proposed method can improve the channel estimation of least square (LS) method by eliminating channel impulse response outside the number of actual impulse response. First, the received signal is demodulated using zero forcing demodulator. Then, it is divided with transmitted pilot symbols to obtain channel response. Interpolation in frequency and time domains is conducted to acquire channel response for all GFDM blocks. Finally, the channel estimation algorithm using DFT is performed. The parameters of the system are adjusted so that they are suitable for tactile internet application. The channel model used is NYUSIM, which utilizes mmWave. Three scenarios in NYUSIM such as urban microcell, urban macro cell and rural macro cell are used and power delay profiles generated from NYUSIM simulator are employed in this system. The results show that mean square error (MSE) from DFT-based channel estimation gives substantial improvement for all scenarios. In addition, symbol error rate (SER) of DFT-based channel estimation provides a slight improvement of ~1.5 dB than LS channel estimation.