Abstract
Custom power devices (CPDs) provide better harmonic minimization when they are connected in parallel with the distribution network. Power switches have a hard impact on harmonic production in distribution networks, which leads to aging effects. Techniques used to control CPD’s provide full switching in various ways. A pulse width modulation (PWM) scheme requires a reference frame transformation that tracks source and load currents to produce a control signal. The voltage de-coupler is installed in the power device's current controllers to minimize fast current harmonics and remove complexity. One-cycle control (OCC) operates in dual boost converter mode and requires only source currents to produce a control signal. Minimum distortions are obtained by the output voltage feedback compensator. The proposed approach compares the performance of two methodologies based on total harmonic distortion (THD) analysis of the same grid voltage. The performance of the CPD using PI and fuzzy one-cycle control techniques is illustrated by simulation, which gives accurate results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have