Abstract
Active chilled beams support high temperature cooling which enables the opportunities of direct ground-coupling and self-regulation. Direct ground-coupling implies cooling through a ground heat exchanger without use of a chiller and self-regulation refers to the elimination of individual room control systems. This paper presents the operation and indoor air temperatures in such an office building located in Stockholm, Sweden, and the analysis includes the unprecedented hot summer of 2018.The results show that the system is capable of supplying the building with enough cooling to not exceed desired indoor air temperature levels. It is also concluded that the self-regulation kept the indoor air temperature satisfactory uniform. The difference between the highest and lowest temperature is 1.9 K on average and below 2.4 K during 90% of the time. Regarding stability, the least stable temperature recorded has a standard deviation of 0.8 K while the average standard deviation is less than 0.5 K. The indoor air temperature during summer is about 2 K lower than suggested by standards. This calls for conducting a thermal comfort survey and may be remedied by increasing the chilled water temperature. To increase the performance of the system, the ground is cooled during winter by preheating the supply air. During 2018, slightly more cooling was extracted in the summer than recharged during winter.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
