Abstract

Treatment process models are efficient tools to assure proper operation and better control of wastewater treatment systems. The current research was an effort to evaluate performance of a submerged membrane bioreactor (SMBR) treating combined municipal and industrial wastewater and to simulate effluent quality parameters of the SMBR using a radial basis function artificial neural network (RBFANN). The results showed that the treatment efficiencies increase and hydraulic retention time (HRT) decreases for combined wastewater compared with municipal and industrial wastewaters. The BOD, COD, {mathrm{NH}}_4^{+}-mathrm{N} and total phosphorous (TP) removal efficiencies for combined wastewater at HRT of 7 hours were 96.9%, 96%, 96.7% and 92%, respectively. As desirable criteria for treating wastewater, the TBOD/TP ratio increased, the BOD and COD concentrations decreased to 700 and 1000 mg/L, respectively and the BOD/COD ratio was about 0.5 for combined wastewater. The training procedures of the RBFANN models were successful for all predicted components. The train and test models showed an almost perfect match between the experimental and predicted values of effluent BOD, COD, {mathrm{NH}}_4^{+}-mathrm{N} and TP. The coefficient of determination (R2) values were higher than 0.98 and root mean squared error (RMSE) values did not exceed 7% for train and test models.

Highlights

  • The membrane bioreactor (MBR), especially the submerged membrane bioreactor (SMBR), has been extensively investigated and applied for municipal and industrial wastewater treatment

  • The removal performance of the SMBR increased from the hydraulic retention time (HRT) of 1 to 5 h so the effluent decreased to 5 mg/L with removal efficiency of 97% at HRT of 5 h

  • The results showed that the HRT and mixed liquor volatile suspended solids (MLVSS) have the greatest influence on the effluent biochemical oxygen demand (BOD), which are in a good agreement with earlier experimental studies [63,64]

Read more

Summary

Introduction

The membrane bioreactor (MBR), especially the submerged membrane bioreactor (SMBR), has been extensively investigated and applied for municipal and industrial wastewater treatment. There are more than 2200 MBR installations in operations or under construction worldwide and most of them are for municipal wastewater treatment [1,2]. Earlier studies have already shown that MBRs can be operated at much higher efficiency than of what is needed for municipal wastewater [3,4]. The interest of using MBR instead of classical activated sludge system for the treatment of industrial wastewater was demonstrated [6,7]. HRT plays an important role in the removal of pollutants in activated sludge processes coupled with membranes [11]. The treatment of industrial wastewater is more expensive than treatment of municipal wastewater by considering the important role of HRT in efficiency and the cost of wastewater treatment

Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.