Abstract
In this work, we present a simple and solution-based synthesis approach to combine the virtues of PEDOT:PSS and carbon nanotube (CNT) by developing a composite film and their application as a hole selective layer (HSL) in organic-silicon hybrid heterojunction solar cell. The heterojunction solar cell with the optimised PEDOT: PSS-CNT HSL showed a notable open-circuit voltage (Voc) of 588.6 mV, short circuit current density (Jsc) of 25.3 mA/cm2 and fill factor (FF) of 60.79% yielding a photo-conversion efficiency (η) of 9.05%. The pristine PEDOT:PSS/Si device obtained an η of 6.2% with a Voc of 502 mV. The role of CNT in the charge transport mechanism and improving Voc was corroborated by employing various characterisation methods such as J-V, C-V, and electrochemical impedance spectroscopy. The composite layer induced a strong inversion layer in silicon and enhanced the device performance. The application of PEDOT:PSS-CNT composite film is not limited to c-Si solar cells, but can also be used to fabricate flexible organic and perovskite solar cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
