Abstract
AbstractThe use of different energy storage materials can have a high effect on the water productivity of solar desalination. This study evaluates the impact of magnetic powders on modified solar still (MPSS) performance and compares the results with conventional solar still (CSS). Black iron oxide magnetic powder was selected to increase solar radiation absorption. The black iron magnetic powder simultaneously acts as a thermal storage material and a porous absorber medium. The thermal energy stored in the magnetic powder improved the performance of the MPSS during peak solar irradiation hours, resulting in higher productivity. The results showed that the thermal performance of MPSS was higher than CSS. The MPSS exhibited a 39.8% higher evaporative and 14.5% higher convective heat transfer rate compared with CSS. Results showed that the cumulative water productivity of MPSS was 31.2% greater than CSS. Also, the energy and exergy efficiencies of MPSS were improved by 18.9% and 19.04%, respectively, compared with CSS. Moreover, the predicted payback period in MPSS and CSS were 3.2 and 4.3 months. Additionally, the CO2 reduction of MPSS was improved by approximately 45.53% compared with that of CSS. The results also showed that the exergoeconomic parameter of MPSS and CSS with energy base was equal to 33.1 and 24.56 kWh/$, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
