Abstract

This study compared pto power performance, fuel efficiency, and NOX emissions of a 23.9 kW compact utility tractor fueled with No. 2 petroleum diesel (D2), a 20% biodiesel blend (B20), and neat biodiesel (B100) under two load conditions. Three steady-state (1h) tests were conducted with each fuel at both rated pto speed (540 rpm) and at peak torque (18 total tests). At rated pto speed, there were significant (p B20>B100) and pto specific fuel consumption (D2=B20 B100) and for pto specific fuel consumption, thermal efficiency, and NOX emissions (D2=B20<B100). While not statistically significant, observed specific NOX emissions were also higher for B20 than for D2 at peak torque. The results indicate that performance and fuel efficiency were similar when the tractor was fueled with either D2 or B20, especially at peak torque. Fueling with B100 resulted in significantly less pto power and torque and higher specific fuel consumption under both load conditions and significantly higher specific NOX emissions at peak torque. Observed specific NOX emissions trended higher as the biodiesel content of the fuel increased for both load conditions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.