Performance comparison of pure, binary and ternary refrigerants considering different systems

Abstract

Mixed refrigerants are widely used in heat pumps; thus, it is necessary to analyze the performance advantages of pure, binary and ternary refrigerants. In this paper, 14 kinds of pure refrigerants were selected, and 24,024 kinds of pure, binary and ternary refrigerants were obtained and analyzed. The refrigerant performance in terms of the COP and volumetric heating capacity were compared in normal, vapor injection with internal heat exchanger and with flash tank systems. In this paper, 40 °C was used as the temperature lift, and four cases with heating production temperatures of 70, 80, 90 and 100°C were analyzed. The Pareto fronts for the different refrigerant types and compositions were obtained by using exhaustive method. The COP and volumetric heating capacity exhibited contradictory trends in all cases. The results showed that mixed refrigerants had significant advantages over pure refrigerants in achieving the Pareto fronts. However, in all cases, when the COP was higher than 5, the binary refrigerants had similar advantages to ternary refrigerants; thus, ternary refrigerants were not necessary. When the COP was lower than 5, it was difficult to further increase the volumetric heating capacity by sacrificing the COP.