Performance Characterization of the Low-Power Halo Electric Propulsion System

Abstract

Performance measurements have been obtained of a novel propulsion concept called the Halo thruster under development within the University of Surrey. The Halo thruster, a type of cusped-field thruster with close similarity to the cylindrical Hall thruster, is motivated by the need for low-power and low-cost electric propulsion for the small satellite sector. Two versions of the device are investigated in this study: a design using permanent magnets at high magnetic-field strength and a design using electromagnets with moderate field strength. While operating at 200 W discharge power, which is of particular interest to power-limited small satellite platforms, the permanent-magnet design achieved a maximum thrust efficiency of 8% at a specific impulse of approximately 900 s using a krypton propellant. By comparison, the electromagnet design achieved a maximum thrust efficiency of 28% at a specific impulse of approximately 1500 s at 200 W using a xenon propellant. For higher levels of power (tested up to 800 W), the performance of the electromagnetic design saturated at approximately 25% thrust efficiency using krypton and 30% using xenon. The thrust efficiency of the permanent-magnet design appeared to increase monotonically up to 600 W reaching a maximum value of 14%.