Abstract

To enhance the removal of nitrate nitrogen (NO3 - -N) in groundwater with a low C/N ratio, electrocatalytic reduction of NO3 - -N has received extensive attention since its electrons can be directly produced in situ while simultaneously providing a clean electronic donor of hydrogen for denitrifying bacteria. In this study, Ti/CNT/CuPd bimetallic catalytic electrodes with different copper-palladium (CuPd) ratios were prepared by electrodeposition onto carbon nanotube (CNT) using titanium (Ti) plates. The results showed that the NO3 - -N conversion rate by Ti/CNT/Cu5-Pd5 electrode was the highest (53.60%) compared with other CuPd electrode ratios because of the combined role of the copper's high NO3 - -N catalytic activity and the palladium's high N2 selectivity. A new type of electrode biofilm reactor (EBR) with Ti/CNT/Cu5-Pd5 cathode, biochar substrate was constructed to explore the removal ability of NO3 - -N in simulated low C/N groundwater. When the influent NO3 - -N concentration was 30 mg/L, under the condition of a 30 mA electronic current and hydraulic retention time (HRT) of 12 h, the removal rate of NO3 - -N could reach as high as 78.1 ± 1.2%, and the N2 conversion rate was 99.7%. The horizontal distribution of microbial communities in EBR showed that the denitrification capacity was significantly improved through the electrochemical catalytic reduction of the Ti/CNT/Cu5-Pd5 cathode and the supply of the hydrogen electron donor to autotrophic denitrogenerating microbes such as Anaerobacillus, Thauera, and Hydrophaga. This study provides a new bimetallic catalytic cathode to enhance the removal of NO3 - -N in groundwater with a low C/N ratio. PRACTITIONER POINTS: The Cu5Pd5/CNTs/Ti electrode is beneficial to the adsorption and reduction of NO3 - -N to N2 . The production of hydrogen electron donors by cathode promoted nitrogen degradation. Activated electrodes together with denitrifying microorganisms contributed to the improved N removal rate.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call