Performance and limitation estimation of a three-tap gated imaging sensor in wide field time-gated fluorescence lifetime imaging systems.

Abstract

In this paper, a computational performance analysis is presented of a wide-field time-gated fluorescence lifetime imaging microscope (FLIM) using practically realizable properties of the laser, sample, and a three-tap time-gated CMOS image sensor. The impact of these component-level properties on the accuracy and the precision of the measurement results are estimated and discussed based on Monte Carlo simulations. The correlation between the detector speed and the accuracy of the extracted fluorescence lifetime is studied, and the minimum required incident photoelectron number of each pixel is estimated for different detector speeds and different fluorescence lifetime measurements. In addition, the detection limits due to the dark current and the parasitic light sensitivity of the detector are also investigated. This work gives an overview of the required fluorescence emission condition as well as the required detector properties for a three-tap time-gated image sensor to achieve good FLIM data in biological applications.