Performance and Kinetics of BPA Degradation Initiated by Powdered Iron (or Ferrous Sulfate) and Persulfate in Aqueous Solutions

Abstract

The widespread use of bisphenol A (BPA) in industry has resulted in BPA contamination of water bodies and even endocrine-disrupting effects on organisms and humans through water transmission. Advanced oxidation processes based on sulfate radicals have received increasing attention due to their ability to efficiently degrade endocrine disruptors (including BPA) in water. In this study, powdered iron (Fe(0)) and ferrous sulfate (Fe(II)) were used as activators to activate persulfate (PS) for the degradation of BPA. The effects of the dosage of the activator, the concentration of PS, the concentration of BPA, the initial solution pH, and the reaction temperature on the degradation efficiency of BPA in Fe(II)/PS and Fe(0)/PS systems were investigated, and the kinetics of BPA degradation under different reaction conditions were analyzed. The results showed that the optimal conditions were [Fe(II)] = 0.1 g/L, [PS] = 0.4 mM, [BPA] = 1 mg/L, T = 70 °C and pH = 5.0 for the Fe(II)/PS system and [Fe(0)] = 0.5 g/L, [PS] = 0.5 mM, [BPA] = 1 mg/L, T = 70 °C and pH = 5.0 for the Fe(0)/PS system; both systems were able to achieve equally good degradation of BPA. The degradation of BPA in the Fe(II)/PS system satisfied the pseudo-secondary kinetic equation under varying PS concentration conditions, otherwise the degradation of BPA in both systems conformed to the pseudo-first-order kinetic equation.