Performance and failure analysis of perforated CFRP/aluminum alloy bonding and self-piercing riveting hybrid joints

Abstract

This paper explores the new hybrid hole-drilled bonding and self-piercing riveting (HH-BR) connection technique to enhance the strength and overall performance of carbon fiber reinforced polymer (CFRP) and dissimilar metal materials at joint interfaces. The forming quality, mechanical performance, failure modes, and fracture characteristics of the CFRP and aluminum alloy joints utilizing the HH-BR procedure were analyzed in detail and compared with the joints of the hole-less adhesive-bonding self-piercing riveting (H-BR) and self-piercing riveting (SPR). At the same time, the effects of different rivet performance levels, overlap lengths, and various fiber orientation angles on joint performance were discussed. The results show that joints made by the HH-BR technique have a substantial advantage in terms of achieving superior mechanical performance and interlocking value. Firstly, HH-BR joints with bent rivets and torn fibers have connection strengths that are noticeably higher than those with CFRP laminate delamination or rivet pullout failure. The use of the HH-BR technique for joining CFRP/aluminum alloy culminated in reduced strength loss and higher energy absorption than H-BR and SPR joints, improving the joint's overall strength. Secondly, the interlock value between the rivet and the plate, is what essentially determines the strength of HH-BR joints, especially evident in connections with 0°/90° fiber orientation and more overlap lengths. The results also show that there is a strong relationship between the height of the rivet head and the joint's mode of failure, and the height of the rivet head is affected by the rivet force. Furthermore, the interlock value's magnitude, the joint's remaining bottom thickness, and the metal material's capacity for plastic deformation are all directly correlated.