Abstract
Herein, the reliability of commercial ultraviolet‐C (UV‐C) light‐emitting diodes (LEDs) subjected to constant current stress is reported. Electrical, optical, and spectral analyses are carried out on UV‐C LEDs with an emission peak of 275 nm and a nominal optical power of 12 mW at 100 mA. Degradation tests are carried out at the maximum rated current, the double and at three times the maximum. The LED lifetime is found to be inversely proportional to the third power of the stress current density, indicating that the degradation mechanism might be activated by high‐energy electrons arising from Auger–Meitner recombination. Electrical characterization indicates an increase in defect‐related leakage, whereas the spectral analysis identifies a variation in two emission peaks which can be ascribed to a defect density increase in the active region and the p‐gallium nitride (GaN) layer of the LEDs. A final remark comes from the strong dependence of lifetime on operating current: increasing current to lower the number of LEDs in a system is not an optimized strategy. In fact, this has a substantial impact on system lifetime, thus lowering the total number of permitted disinfections.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.