Performance analysis on the heating performance of CPV/T-air dual source heat pump system with finned microchannels heat exchanger

Abstract

Solar-assisted heat pump technology is a clean building energy conserving technique with high efficiency, but it often has limitations such as large evaporator cover area and significant susceptibility to weather conditions, preventing it from being widely used. In this paper, a concentrated photovoltaic/thermal-air dual source heat pump system integrated with finned microchannel heat exchanger (CPV/T-FMC-SAHP) is proposed to solve these problems. A mathematical model for the CPV/T-FMC-SAHP system is developed, and sensitivity analysis of different environmental parameters on system performance is conducted by numerical simulation. Performance comparisons are made under dual-source and solar heating modes to explore the optimal operating conditions. The results suggest that changes in ambient temperature have a relatively minor impact, primarily attributed to the limited surface area of the evaporator. On the other hand, increased irradiance, facilitated by the concentrator, significantly improves the system's performance. In the case of solar irradiation at 600 W/m2 and an ambient temperature of 13 °C, the system's heating capacity is 1747.38 W, with a COP reaching 5.31. In comparison, the COP of existing solar-assisted heat pump systems under this condition are about 4.5, so there is an improvement of about 18 %. Furthermore, activating the air blower on the weather with bad irradiation but relatively warm can further increase the system's heating capacity. To sum up, the CPV/T-FMC-SAHP system exhibits a substantial improvement in performance and high level of integration compared to traditional solar-assisted heat pumps. Therefore, this system can provide ideas for improving the performance of heat pumps in the case of limited space. It is not only meaningful in the field of building energy conserving, but also conducive to addressing global energy challenges.