Abstract

Besides reducing undesired noise sources and limiting speech distortion, another important objective of a binaural noise reduction algorithm is the preservation of the binaural cues of all sound sources in the acoustic scene. In this paper, we consider the binaural minimum variance distortionless response beamformer with partial noise estimation (BMVDR-N), which allows to trade off between noise reduction performance and binaural cue preservation of the noise component by mixing the output signals of the BMVDR beamformer with the noisy reference microphone signals. For a directional noise source, it has been shown that incorporating an external microphone in addition to the head-mounted microphones enables both the noise reduction performance as well as the interaural time and level difference cues of the noise component to be improved in the output signals. In this paper, we consider an arbitrary noise field and analytically show that incorporating an external microphone in the BMVDR-N beamformer enables 1) a larger output signal-to-noise ratio (SNR) for the same mixing parameter, 2) the same output SNR for a larger mixing parameter, and 3) the same desired output magnitude squared coherence (MSC) of the noise component for a smaller mixing parameter to be obtained. The derived analytical expressions are firstly validated using simulated anechoic acoustic transfer functions, where the listener’s head is modelled as a rigid sphere. Experimental results using recorded signals for a binaural hearing device setup in a reverberant environment also show that in a realistic scenario incorporating an external microphone in the BMVDR-N beamformer significantly improves the output SNR and reduces the mixing parameter that is required to obtain a desired output MSC of the noise component compared to using only the head-mounted microphones.

Highlights

  • INTRODUCTIONN OISE reduction algorithms for head-mounted assistive hearing devices (e.g., hearing aids, earbuds or hearables) are crucial to improve speech intelligibility and speech quality

  • N OISE reduction algorithms for head-mounted assistive hearing devices are crucial to improve speech intelligibility and speech qualityManuscript received March 6, 2020; revised August 27, 2020 and October 19, 2020; accepted November 29, 2020

  • In this paper we focus on the binaural minimum variance distortionless response (BMVDR) beamformer with partial noise estimation (BMVDR-N) [17], [18], which mixes the output signals of the BMVDR beamformer with the noisy reference microphone signals using a mixing parameter

Read more

Summary

INTRODUCTION

N OISE reduction algorithms for head-mounted assistive hearing devices (e.g., hearing aids, earbuds or hearables) are crucial to improve speech intelligibility and speech quality. For a coherent (directional) noise source, it has been shown in [23] that incorporating an external microphone in the binaural MWF with partial noise estimation enables both the output signal-to-noise ratio (SNR) as well as the binaural cues, i.e., ILD and ITD, of the output noise component to be improved compared to only using the head-mounted microphones. We consider an arbitrary noise field and derive analytical expressions for the output SNR and the binaural cues (more in particular the MSC) of the output noise component when incorporating an external microphone in the BMVDR-N beamformer. The experimental results show that in a realistic scenario, incorporating an external microphone in the BMVDR-N beamformer significantly increases the output SNR and decreases the mixing parameter required to obtain a desired output MSC, i.e., the spatial impression, of the noise component for different positions of the external microphone and the desired source.

HEARING DEVICE CONFIGURATIONS
Binaural Hearing Device Configuration
Extended Binaural Hearing Device Configuration
Performance Measures and Binaural Cues
BMVDR BEAMFORMERS
EXTENDED BMVDR BEAMFORMERS INCORPORATING AN EXTERNAL MICROPHONE
Extended BMVDR and BMVDR-N Beamformers
Output SNR With an External Microphone
Output MSC With an External Microphone
EXPERIMENTAL RESULTS
Validation Using Anechoic ATFs
Experimental Results Using Reverberant Recordings
CONCLUSION
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call