Abstract

This paper presents a cost-effective spectrally shaped quadrature amplitude modulation (SS-QAM) signal in bandwidth limited direct detection optical orthogonal frequency division multiplexing (DDO-OFDM) systems. The concatenation of the nonlinear differential coding (NLDC) and real-valued precoding sequentially implements spectral-shaping and multi-carrier modulation. Real-value discrete cosine transform (DCT) and discrete Hartley transform (DHT) are used to realize the uniform distribution of the fluctuation signal-to-noise ratio (SNR) and reduce the peak-to-average power ratio (PAPR). To broaden the flexibility of constellation mapping and improve the fine granularity of signals, six modulation formats are analyzed and evaluated in DDO-OFDM systems. Results show that SS-QAM is superior to uniformly distributed QAM in terms of reducing bit error rate (BER) and increasing normalized generalized mutual information (NGMI). Compared to the uniform 25/36/49/64/81/100 QAM OFDM signal, when the transmission distance is 20 km, SS-25/36/49 QAM signal can achieve error free transmission and SS-64/81/100 QAM can achieve 0.9971/1.0037/1.0255 Q-factor improvement and 0.0009/0.0014/0.0015 NGMI gain. When the transmission distance is 50 km, SS-25/36/49/64/81/100 QAM can achieve 0.4182/0.5169/0.9311/0.9988/1.0216/1.1487 Q-factor improvement and 0.0004/0.0008/0.0031/0.0043/0.0066/0.0083 NGMI gain. When the transmission distance is 80 km, SS-25/36/49/64/81/100 QAM can achieve 0.4754/0.7486/1.181/1.2012/1.2302/1.3904 Q-factor improvement and 0.0015/0.0046/0.0108/0.0152/0.0172/0.0205 NGMI gain. In addition, the Q-factor and NGMI gain increases as the fiber length increases, which verifies that the presented scheme is robust to the nonlinear effect.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.