Performance Analysis of Soluble Bridge Plug Materials for Fracturing in Unconventional Oilfields

Abstract

With the continuous in-depth development of oil and gas resources, unconventional oil and gas resources show great potential. In recent years, 70% of the proven oil and gas resources in China are unconventional oil and gas resources. Therefore, the development of unconventional oil and gas resources has a huge impact on the increase in the production capacity of the oil and gas resources in China. Staged fracturing of horizontal wells is the main technical measure to improve unconventional oil and gas production stimulation. In the fracturing process, the soluble bridge plug technology can not only effectively solve the problems of large investment in drilling and grinding of composite bridge plugs, high risks, self-locking of oil, casing deformation, etc., causing the bridge plug to be unable to be drilled and remove and affect subsequent production but also can successfully make up for the problems of subsequent production. The large-diameter bridge plug cannot achieve the full diameter of the wellbore and cannot carry out operations such as postproduction logging and refracturing, which can ensure the integrity of the wellbore to the greatest extent. In this paper, HNBR was used to modify MPU to prepare HNBR/MPU soluble rubber, and the effect of blending ratio on the vulcanization characteristics, mechanical properties, compatibility, thermal stability, and degradation behavior of composites was studied. The results showed that with the increase in the amount of HNBR, the degree of cross-linking of the composite material decreased gradually, and the mechanical properties decreased slightly. With the increase in the amount of HNBR, the thermal stability of the material decreases. The use of HNBR greatly reduced the degradation rate of MPU. When the amount of HNBR was changed from 20 phr to 40 phr, the tensile strength retention rate of the composite after soaking increased from 14.73% to 39.72%.