Performance analysis of carbon nanotube and graphene nanoribbon based biochemical sensors at atomic scale

Abstract

Advancements in fabrication technologies have led to the possibility of synthesizing atomic-scale graphene nanoribbon (GNR) and carbon nanotube (CNT) based nanodevices. The purpose of this study was to model the electronic properties and electrical characteristics of these devices by atomistic modeling using density functional theory and the non-equilibrium Green’s function and compare the effects of molecular functionalization and sensing. The potential profile of the device was computed using the three-dimensional Poisson equation for smaller applied bias within one voltage range. Simulations showed a bandgap of 1 eV for armchair GNRs (AGNRs), which were insensitive to functionalized amine molecules, resulting in fewer alterations in the density of states (DoS), transmission spectra and the device current (ΔI). The bandgap further increased to 2 eV upon rolling the GNR into a armchair CNT (ACNT), which further decreased sensitivity. However, changing the configuration of the AGNR to a zigzag GNR (ZGNR) led to remarkable changes in the DoS and transmission spectra and a significant improvement in sensitivity. This improvement increased by 1.5–2 times upon rolling the ZGNR into a zigzag CNT (ZCNT). Thus, at lower dimensions in atomic scale, we found an alteration in device current of the carbon structures that was directly proportional to sensitivity in the following order: ΔI ACNT < ΔI AGNR < ΔI ZGNR < ΔI ZCNT. However, the same was found to fall for ZGNR and ZCNT with an increase in width to length (W/L) ratio. This highlights the importance of smaller atomic structures and this work provides a guideline for effective utilization of these structures for biochemical sensing.