Pentacene organic field-effect transistor on metal substrate with spin-coated smoothing layer

Abstract

In this letter we report the use of roughly polished aluminum substrates with spin-coated polymer-smoothing layers for the fabrication of pentacene field-effect transistors. Transistors with spin-coated poly(methylmethacrylate) gate insulator layers were fabricated and showed good performance. On the gate insulator surface, the root-mean-square roughness was found to be 0.18nm, significantly smaller than the aluminum surface roughness, which is on the scale of tens of nanometers. Field-effect carrier mobilities extracted from the device data reached 0.75cm2V−1s−1; the maximum on/off current ratio was near 5×106.